Monster FX Gelatine Prosthetic – Neck Bite Prosthetics

The Neck Bite by Monster FX is a highly detailed bite injury that is perfect for use on the neck, upper arm or leg for the simulation of human, animal, monster or zombie bites.

Highly detailed large appliance with multiple deep puncture sites.

Monster FX prosthetics are high quality and highly detailed lacerations, wounds and bites available in low-cost, high skin compliance gelatine.

Made in the UK.

How to apply

Gelatine

To apply the gelatine version of this prosthetic, simply remove from packaging and place the prosthetic on a cleanable surface (such as a stainless steel palette). Clean the area of the skin on the desired area of appliance application; use a product that will remove excess oil from the surface of the skin (such as an alcohol based product); this will enhance the bond. Apply a prosthetic or silicone adhesive (such as WRATH Pros-Aide® or Kryolan Silicone Adhesive) to the contact side of the prosthetic evenly and in small quantity. Apply the same adhesive to the appropriate area of skin. Allow plenty of time to dry (this is important, because any adhesive that is not dry before application will remain uncured, bubble and not bond). Once the adhesive is dry (clear for prosthetic adhesive, non-wet for silicone adhesive) apply the prosthetic to the area of skin; press the prosthetic in the centre, keeping the edges up (if possible) to make sure all air is removed, gently pressing down the prosthetic, working outwards. Once fully applied, hold in place for a suitable length of time. (For silicone adhesive, apply high pressure to ensure the bond).

Now that the prosthetic is applied to the skin, simply use a gelatine blender, such as WRATH Witch Hazel to blend out the edges of the prosthetic. To do this, use a cotton swab soaked in the blender, working out the edges into the skin. (Top tip: WRATH Witch Hazel works better when warm). Once all the edges are blended out, apply a setting powder over the prosthetic and surrounding skin (such as WRATH Super-Set Powder) to remove excess moisture and tackiness from adhesive. Allow time to set and heavily dust off the area with a powder brush.

You are now ready to apply your desired make-up and blood if required.